REGENERATED AND remanufactured DIESEL injectors
1. PROFESSIONAL INJECTOR REMANUFACTURING BY REDAT
2. WHO IS AUTHORISED TO REGENERATE OR REMANUFACTURE A DIESEL INJECTOR?
3. HOW TO REGENERATE DIESEL INJECTORS
4. HOW TO CARRY OUT PROFESSIONAL MAINTENANCE ON DIESEL INJECTORS
5. PROFESSIONAL EQUIPMENT FOR INJECTOR MAINTENANCE
6. REDAT INJECTOR AND SPARE PARTS CATALOGUES FOR PROFESSIONAL SOLUTIONS
7. REDAT REGENERATED INJECTORS: A TOP-QUALITY CHOICE
1. PROFESSIONAL INJECTOR REMANUFACTURING BY REDAT
The maintenance of Diesel injectors and their components (such as gaskets, solenoid valves, O-rings and washers) is not always sufficient to guarantee the optimal running of a diesel engine. Periodic cleaning is sometimes not enough and it may be necessary to replace the injector components or the entire part due to wear or damage.
This is why you should always know who to rely on for diesel injector regeneration, a company that can supply spare parts and accessories of proven quality, suitable for the best brands of injectors on the market.
REDAT SpA provides highly professional injectors, components and remanufacturing kits that perform as well as the originals. REDAT’s remanufactured diesel injectors will ensure the optimum performance and maximum efficiency of your diesel engine thanks to our expert staff who use specialised tools and top-quality spare parts.
2. WHO IS AUTHORISED TO REGENERATE OR REMANUFACTURE A DIESEL INJECTOR?
The regeneration and remanufacturing of diesel engines must be carried out by highly qualified professionals, armed with specific tools and experience in the field.
Typically, workshops specialising in diesel engines or manufacturers’ authorised service centres are able to offer this type of service. There are also companies specialising in the regeneration and remanufacturing of diesel injectors such as REDAT SpA that can be contacted for this type of service.
It is important to choose an experienced company offering guarantees on the quality of the work performed and the durability of the regenerated or remanufactured injectors. You can thus be sure that your diesel injectors have been correctly serviced, allowing you to use your vehicle safely with optimal performance.
3. HOW TO REGENERATE DIESEL INJECTORS
The diesel injector regeneration process may vary depending on the type of injector, but it typically consists of the following steps:
- Disassembly of the diesel injectors: the injector is first separated from the rest of the engine and disassembled in all its parts to check its “state of health”.
- Inspection: once disassembled, the diesel injector is inspected to identify any defects or parts that need repairing or replacing.
- Replacement of faulty parts: damaged or worn parts are replaced with new parts with certified quality. At this stage, gaskets, springs and other parts subject to wear are always replaced.
- Testing and calibration of the injectors: after cleaning and replacement of the defective parts, the injectors are reassembled and tested for fuel flow rate, injection pressure, jet shape and fuel delivery. This can only be done using specialised equipment such as dedicated test benches.
- Packaging of the diesel injectors: once the tests have been completed, the injectors are safely and securely packed for shipment or immediate use.
4. HOW TO CARRY OUT PROFESSIONAL MAINTENANCE ON DIESEL INJECTORS
The maintenance of diesel injectors is essential to ensure the proper functioning of the engine and to prevent any problems.
Here are some tips for maintaining diesel injectors:
• Use high-quality fuel: using low-quality fuel can lead to build-up and debris accumulating in the injector components, affecting their performance. It is important to only use the fuel recommended by the manufacturer.
• Change the fuel filter: the filters help to trap the dirt particles and debris in the fuel before they reach the injectors. It is important to change the fuel filters regularly according to the manufacturer’s recommendations.
• Use fuel additives: some fuel additives can help prevent the build-up of deposits and debris in injector components. Follow the manufacturer’s recommendations for choosing the best additive.
• Driving the vehicle aggressively or exceeding speed and load limits can affect injector performance and engine life. It is, therefore, essential to drive the vehicle correctly and to respect speed and load limits.
5. PROFESSIONAL EQUIPMENT FOR INJECTOR MAINTENANCE
To ensure the correct operation of a Diesel injector over time, it is necessary to carry out periodic checks and proper maintenance. It is good to always pay close attention to any malfunction signals in order to be able to promptly intervene on the injector and preserve the efficiency of the engine.
You will find all the components and spare parts required for diesel injector remanufacturing in our catalogue, including the tools for disassembly and assembly: the injector fixing block, suitable for repair operations, the 27mm hexagonal open wrench and the adapter nut with a nine-sided wrench for the maintenance of the nozzle nut. The tools for remanufacturing injectors also include the complete kit for bar filter replacement.
However, REDAT does not only provide you with tool boxes: for each specific kit for the assembly and disassembly of diesel injectors, the catalogues explain the correct use of the tools included (such as the wrench for the assembly/disassembly of the solenoid valve, the wrench for the ring nut, or the pliers for the assembly/disassembly of the external elastic rings).
6. REDAT INJECTOR AND SPARE PARTS CATALOGUES FOR PROFESSIONAL SOLUTIONS
REDAT makes sure that its catalogues are constantly updated to guarantee customers maximum safety and all the necessary operating instructions and latest innovations on the market.
Our 2023 catalogues provide an in-depth look at diesel injectors, with specifications of the models they fit, as well as exploded views, spare parts and equipment for repairing, disassembling and reassembling the devices.
REDAT 2023 catalogues provide you with all the support you need for the regeneration and maintenance of diesel injectors, plus precision guidance to give you all the information you need to choose the best products and spare parts.
7. REDAT REGENERATED INJECTORS: A TOP-QUALITY CHOICE
For over fifty years, REDAT S.p.A. has been a leader in the international injector and diesel engine market, operating with the utmost professionalism and efficiency. Our Made in Italy products cover most of the injection systems on the market for all sectors , including automotive, industrial, marine, agricultural - and in our aftermarket catalogues, you will find all injector parts for the major brands on the market: Siemens VDO Continental, Caterpillar-Perkins, Denso, Bosch, Delphi, L’Orange-MTU, Cummins, Unit Injector.
You can find out the availability and price of all the injectors and components from our e-commerce store, as well as access interactive exploded views. If you do not have an Account enabled to view prices, you can send a quotation request, or contact our offices to request a Reserved Account directly on the REDAT website.
Contact us with no obligation for more information on products and services on +39 011 979 1111 or by email to [email protected] or [email protected].